BROMUX - L5 Brass / Copper Brazing Flux
This Product is RoHS Compliant & R134a NON-CFC Compatible
BROMUX* (* proprietary name of MATHURE FLUXES) has two versions, REGULAR This is having better fluidity and good cleaning activity. EASY CLEAN (EC) This flux gives easily removable post brazing flux residues, and it also has comparatively low moisture content. Applicable of this flux in paste or powder form for copper base alloys to be brazed to MS. Or similar alloys gives stronger and clean joints. This flux is also suitable to most of the brass and copper based brazing alloys. Easy clean flux is well suited in applications where job is to be spray painted in final stages for e.g. Furnitures.
APPLICATION:
Tool making, where brazing of tips is done by using silicon bronze. Scooter industry, bicycle industry, pump manufacturers, stove manufacturers, automobile industry, furniture manufacturing etc
PHYSICAL PROPERTIES:
| Name | Regular | Easy Clean |
| Form | Powder / Paste | Powder |
| Colour | White / Light Pink | White |
| Solubility | 100% | 100% |
| Moisture | < 5.0% | < 5.0% |
| Active Temp | 780 - 1050ΊC | 780 - 1050ΊC |
| pH | 7 TO 9 | 7 TO 9 |
TOXICITY:
This flux is very mild on human skin, however it is recommended to clean hands and part of body if it comes in contact with the flux. Fluxes being chemicals, precautions to be taken while handling
HANDLING:
Recap the flux container after being used to avoid moisture absorption, as this flux is highly hygroscopic.
Fluxes are to be kept in closed air right containers when not in use.
Store in cool and dry place.
It is recommended to use fluxes within its expiry date.
Standard precautions to be taken during brazing operation
PACKAGING:
These fluxes are available in properly labeled containers in 250, 500. 1000 Gms. Pack.
TECHNICAL INFORMATION
Fluxes are mainly proprietary items, hence standards are not always specified. However it is essential to know whether a right type of the flux is being used in a required brazing / welding process. Following is information regarding brazing process:
It is a joining process where filler metal has a liquids above 425 Ί C, below that of the base metal and is distributed in the joint by the capillary attraction. Brazing processes are designated according to the sources of or methods of heating. E.g. Torch brazing, furnace brazing etc. Whatever may be the
method, fluxes play very important role in making leak proof sound joint.
Characteristics of Flux:
Dissolution of oxides formed and to remove dirt along with oxides, a cleaning function
Flux is an indicator of temperature indicating application of filler metal as it is melting prior to filler metal. It is a special feature of flux in torch brazing.
Flux helps to reduce surface tension which increases wet ability of the filler metal and promotes strong joint by capillary action.
Viscosity of the molten flux must be adequate to be readily displaced by molten filler metal.
In the process of torch brazing colour of the flame and gasses involved in process are also of prime importance from the health and safety aspects of the operator
Fluxes are usually applied in powder, paste or liquid form depending on requirement of a job extra flux and slag are removed after brazing by acidulated water, and rinsing by water thereafter.
Methods of inspection:
In most cases non-destructive methods are used to test braze joints as:
Visual examination in case of simple joint.
Proof testing loads are applied to test a joint.
Pressure testing for joint where gas or liquid tightness is required.
Vacuum testing generally employed in checking assemblies used in refrigeration equipments and appliances. Other methods such as radiography, electrical resistance, ultrasonic inspection, thermal heat transfer inspection etc are also used.